Getting Started with ALEXAN ATMEL AT89C2051 Programmer

View previous topic View next topic Go down

Getting Started with ALEXAN ATMEL AT89C2051 Programmer

Post by Admin on Fri Sep 08, 2017 3:19 pm

What You Need To Get Started


1. Personal Computer with CD-ROM and serial or USB port
2. ALEXAN ATMEL Programmer Software
3. ALEXAN ATMEL Programmer Module
4. RS232 Serial Cable Or a USB to COM/Serial cable.
5. 12 to 16Vdc Power Adaptor

6. AT89C2051 or AT89C4051 ATMEL Microcontroller (or MCU)
7. Any debugger/compiler software where you can write your source code
and compile it to a hex file format
8. A Hex file




Alexan Atmel Programmer Module





Alexan Atmel Programmer Computer-Interface Software





Last edited by Admin on Fri Sep 15, 2017 11:57 am; edited 1 time in total
avatar
Admin
Admin

Posts : 12
Join date : 2017-09-08
Age : 19

View user profile http://dannabanana.forumotion.asia

Back to top Go down

Re: Getting Started with ALEXAN ATMEL AT89C2051 Programmer

Post by camille on Thu Sep 14, 2017 8:00 pm

what ideal debugger/compiler software that converts and compile a source code to a hex file format?
avatar
camille
Newbie

Posts : 2
Join date : 2017-09-14

View user profile

Back to top Go down

Re: Getting Started with ALEXAN ATMEL AT89C2051 Programmer

Post by ndreanicoke on Fri Sep 15, 2017 8:06 am

What if you forgot to lower down the lever and you do the programming, will your ic can still work?

ndreanicoke
Newbie

Posts : 2
Join date : 2017-09-15

View user profile

Back to top Go down

Re: Getting Started with ALEXAN ATMEL AT89C2051 Programmer

Post by herbuela on Mon Sep 25, 2017 9:30 pm

camille wrote:what ideal debugger/compiler software that converts and compile a source code to a hex file format?
 I was searchingd about that too, last night, and  I found ",Keil" itmakes C compilers, macro assemblers, real-time kernels, debuggers, simulators, integents, evaluation boards, and emulators for the ARM,  but still  I a searching for othr ways hahhaa.share- Very Happy

herbuela
Member

Posts : 3
Join date : 2017-09-25

View user profile

Back to top Go down

Re: Getting Started with ALEXAN ATMEL AT89C2051 Programmer

Post by herbuela on Mon Sep 25, 2017 9:33 pm

how can I convert P1.0 in hex code?

herbuela
Member

Posts : 3
Join date : 2017-09-25

View user profile

Back to top Go down

Re: Getting Started with ALEXAN ATMEL AT89C2051 Programmer

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum